Stainless steel IP68 single point load cell
All units are produced in a quality system that meets the requirements of ISO-9001
Load Cell Features:
* Full-encapsulated welding load cell
* Stainless steel,IP68
* Suitable for single load cell structured platform scales
* High accuracy
* Maximum platform size: 600*600mm
Main Parameters:
* Capacity: 50kg,100kg,150kg,200kg,250kg,300kg
* Accuracy: 3000,class c3
Electrical Connections-Compression Positive
RED ----------- +EXC
BLACK----------- -EXC
GREEN----------- +SIGNAL
WHITE----------- -SIGNAL
BARE ----------- SHIELD
CAUTION: Cutting cable will affect the full scale output calibration
Load Cell Specifications:
| Accuracy class | C3 |
| Output sensitivity(=FS) | 2.0±0.2 mV/V |
| Maximum capacity(Emax) | 50/100/150/200/250/300 kg |
| Maximum number of load cell intervals(nLC) | 3000 |
| Ratio of minimum LC verification interval Y=Emax/Vmin | 10000 |
| Combined error | ±0.023%FS |
| Minimum dead load | 0%FS |
| Safe overload | 150%FS |
| Ultimate overload | 300%FS |
| Zero balance | ±1.5 |
| Excitation,recommended voltage | 5~12 V (DC) |
| Excitation maximum | 18 V (DC) |
| Input resistance | 350±3.5 Ω |
| Onput resistance | 351±2.0 Ω |
| Insulation resistance | ≥ 5000MΩ (50VDC) |
| Compensated temperature | -10~+40 ℃ |
| Operating temperature | -35~+65 ℃ |
| Storage temperature | -40~+70 ℃ |
| Element material | stainless steel |
| Recommended torque on fixation | M6: 10 (N.m) |
| Corner correction | 0.02 % load value / 100 mm |
| Ingress protection (according to EN 60529) | IP68 |
| Note: "S1" output sensitivity is 2.0±0.002mV/V |
|