- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
English
 |
| Display: | |
|---|---|
| Serial Interface: | |
| Scale: | |
| Protection Level: | |
| Quantity: | |
D520
ATRONTEC
D520 Multifunctional Industrial Process Weighing Controller
– D520 is a high precision Industrial Process Weighing Controller. This weighing controller has a variety of field-bus communication with high reliability which is typical for complicated and harsh environment.
– Therefore D520 can be used in chemical and hazardous industries for weighing purpose,packaging engineering,batching control system,filling system solution,etc…
Weighing Indicator Overviews:
One analog load cell I/F, support up to 10x350 Ohm load cells
Up to 150,000 display Division
128X64 dot matrix OLED display
RTC (Date & Time)
Two serial ports:
COM1 - RS232
COM2 - RS232/485
10/100M Ethernet port
Continuous Output Weight ( TCP/UDP)
Demand Input and Output (TCP/UDP)
MODBUS-TCP Server (TCP)
Calibration Methods
2-Point Calibration
3-point Calibration
Free Weights Calibration
Target Controller
1-speed or 2-speed control mode
Auto spill adjustment, Start limit checking, Start auto zero
Fill/None or Fill/Dump
Two auxiliary comparators : Under Auxiliary and Over Auxiliary
Zero tolerance checking
Total
Scale print command weight total
Target control fill weight total
Rate Calculation, display and report via PLC I/F
Remote configuration, calibration and lock keypad via COM1,COM2 and PLC I/F
MODEBUS-RTU supported via COM1 and COM2
200Hz weight updating speed
200Hz target comparison speed
100Hz PLC I/F (PROFIBUS-DP) weight updating speed
50Hz MODBUS-RTU updating speed
IP65 – Panel mount version, IP69K – Harsh version
Power In : 85-264VAC，49-61Hz, Maximum Power consumption less than 6W
Explosion-Proof: IP65 Protection, Ex d ib[ia II C Ga] IIB T6 Gb/DIP A21 TA,T6Exd IIB T6
Option Board
8-Input/12-Output OC type
8-Input/12-Output Relay type
PROFIBUS-DP
4~20mA analog output option : x1 or x2
CC-Link option board
PROFINET option board
EtherNet/IP option board
Operating Environment Conditions
Operating Temperature: -100℃∼400℃; Humidity: 10％∼95％ No Condensation
Storage Temperature: -400℃∼600℃; Humidity: 10％∼95％ No Condensation
Weighing Indicator Specifications:
| Accuracy Class | III |
| CMC Approval | 150,000d, 6000e(Approved) |
| Display | 128×64 green OLED dot matrix graph display |
| Update Speed | 60ms |
| Status Display | Tare,Net,Motion,Zero,Unit,PLC |
| 20 Keys | F key,Tare/Clear,Zero,Print,10 digit keys |
| Power On/Off | None |
| Keypad Lock | Can be locked via local input or remote communication(MODBUS-RTU,MODBUS-TCP,PROFIBUS-DP) |
| Scale Basic Functiona | |
| Calibration | 2-point with testing weight or no testing(CalFree) |
| Filter | 5-step |
| Scale Process | Tare,Zero,Auto Zero,Motion, Auto Tare, Auto Clear,Auto Print |
| Inputs | Option 8 Inputs,Can be assigned remote inputs for remote host(PLC or DCS) |
| Outputs | Option 12 Outputs,Can be assigned remote outputs for remote host(PLC or DCS) |
| Others | Display gross weight, net weight, rate |
| Load Cell | |
| Exciting Voltage | 5V DC, max 150mA |
| Load Cell Number | Max 10 x 350Ω or 24 x 1100Ω |
| Connect Type | 4- wired or 6-wired , Cable:274mR/m2 |
| Communication I/F | |
| Serial Port | 2 ports:COM1-RS232, COM2-RS232/485 |
| MODBUS-RTU,Continuous output weight,Demand input & output | |
| PROFINET | Connect to Siemens PLC,report integer weight data & floating weight data |
| EtherNET/IP | Connect to Rockwall PLC,report integer weight data & floating weight data |
| MODBUS-RTU | Support, Integer & Floating weight data |
| LAN | 100M,TCP,UDP,MODBUS-TCP |
| Analog Output | two chanel 4-20mA output, 16-bit DAC |
| PROFIBUS-DP | Integer and floating data output,100Hz updating speed |
| 3GSD inside,totally compatible to PANTHER & IND131/331 | |
| CC-LINK | for Mitsubishi PLC,totally compatible to PANTHER & IND131/331 |
| Application PAC | |
| Basic Weighing | 2-speed target control:Filling & dumping control(Over/Under/Over) |
| Batching PAC | Up to 8 materials, Sequence Filling/ Random Filling |
| Checking Weighing PAC | Both photoelectricity and weight input are available for checking weighing,Support classify output:up to 8 ranges |
| Bagging PAC | Weigh-Hopper Bagging/No-Weigh-Hopper Bagging/In-continuous-weighing totalization Bagging |
| Filling PAC | No-Gun-Control Filling / Gun-Control Filling |
D520 Multifunctional Industrial Process Weighing Controller
– D520 is a high precision Industrial Process Weighing Controller. This weighing controller has a variety of field-bus communication with high reliability which is typical for complicated and harsh environment.
– Therefore D520 can be used in chemical and hazardous industries for weighing purpose,packaging engineering,batching control system,filling system solution,etc…
Weighing Indicator Overviews:
One analog load cell I/F, support up to 10x350 Ohm load cells
Up to 150,000 display Division
128X64 dot matrix OLED display
RTC (Date & Time)
Two serial ports:
COM1 - RS232
COM2 - RS232/485
10/100M Ethernet port
Continuous Output Weight ( TCP/UDP)
Demand Input and Output (TCP/UDP)
MODBUS-TCP Server (TCP)
Calibration Methods
2-Point Calibration
3-point Calibration
Free Weights Calibration
Target Controller
1-speed or 2-speed control mode
Auto spill adjustment, Start limit checking, Start auto zero
Fill/None or Fill/Dump
Two auxiliary comparators : Under Auxiliary and Over Auxiliary
Zero tolerance checking
Total
Scale print command weight total
Target control fill weight total
Rate Calculation, display and report via PLC I/F
Remote configuration, calibration and lock keypad via COM1,COM2 and PLC I/F
MODEBUS-RTU supported via COM1 and COM2
200Hz weight updating speed
200Hz target comparison speed
100Hz PLC I/F (PROFIBUS-DP) weight updating speed
50Hz MODBUS-RTU updating speed
IP65 – Panel mount version, IP69K – Harsh version
Power In : 85-264VAC，49-61Hz, Maximum Power consumption less than 6W
Explosion-Proof: IP65 Protection, Ex d ib[ia II C Ga] IIB T6 Gb/DIP A21 TA,T6Exd IIB T6
Option Board
8-Input/12-Output OC type
8-Input/12-Output Relay type
PROFIBUS-DP
4~20mA analog output option : x1 or x2
CC-Link option board
PROFINET option board
EtherNet/IP option board
Operating Environment Conditions
Operating Temperature: -100℃∼400℃; Humidity: 10％∼95％ No Condensation
Storage Temperature: -400℃∼600℃; Humidity: 10％∼95％ No Condensation
Weighing Indicator Specifications:
| Accuracy Class | III |
| CMC Approval | 150,000d, 6000e(Approved) |
| Display | 128×64 green OLED dot matrix graph display |
| Update Speed | 60ms |
| Status Display | Tare,Net,Motion,Zero,Unit,PLC |
| 20 Keys | F key,Tare/Clear,Zero,Print,10 digit keys |
| Power On/Off | None |
| Keypad Lock | Can be locked via local input or remote communication(MODBUS-RTU,MODBUS-TCP,PROFIBUS-DP) |
| Scale Basic Functiona | |
| Calibration | 2-point with testing weight or no testing(CalFree) |
| Filter | 5-step |
| Scale Process | Tare,Zero,Auto Zero,Motion, Auto Tare, Auto Clear,Auto Print |
| Inputs | Option 8 Inputs,Can be assigned remote inputs for remote host(PLC or DCS) |
| Outputs | Option 12 Outputs,Can be assigned remote outputs for remote host(PLC or DCS) |
| Others | Display gross weight, net weight, rate |
| Load Cell | |
| Exciting Voltage | 5V DC, max 150mA |
| Load Cell Number | Max 10 x 350Ω or 24 x 1100Ω |
| Connect Type | 4- wired or 6-wired , Cable:274mR/m2 |
| Communication I/F | |
| Serial Port | 2 ports:COM1-RS232, COM2-RS232/485 |
| MODBUS-RTU,Continuous output weight,Demand input & output | |
| PROFINET | Connect to Siemens PLC,report integer weight data & floating weight data |
| EtherNET/IP | Connect to Rockwall PLC,report integer weight data & floating weight data |
| MODBUS-RTU | Support, Integer & Floating weight data |
| LAN | 100M,TCP,UDP,MODBUS-TCP |
| Analog Output | two chanel 4-20mA output, 16-bit DAC |
| PROFIBUS-DP | Integer and floating data output,100Hz updating speed |
| 3GSD inside,totally compatible to PANTHER & IND131/331 | |
| CC-LINK | for Mitsubishi PLC,totally compatible to PANTHER & IND131/331 |
| Application PAC | |
| Basic Weighing | 2-speed target control:Filling & dumping control(Over/Under/Over) |
| Batching PAC | Up to 8 materials, Sequence Filling/ Random Filling |
| Checking Weighing PAC | Both photoelectricity and weight input are available for checking weighing,Support classify output:up to 8 ranges |
| Bagging PAC | Weigh-Hopper Bagging/No-Weigh-Hopper Bagging/In-continuous-weighing totalization Bagging |
| Filling PAC | No-Gun-Control Filling / Gun-Control Filling |
